Bisphenol A is a kind of chemical raw materials in industry for the synthesis of polycarbonate and epoxy resins and other materials,bamboo furniture including polycarbonate (PC), is a clear, hard plastic, commonly used in the manufacture of baby bottles bottles .
The epoxy resin is often used as metal containers such as baby formula cans --- lining. The plastic in direct contact with food, the security will naturally be of concern.
Food safety has always been one hot topic, because healthy food is to human health by questioning any acute, subacute or chronic hazards. Concern in the safety of the food itself,bamboo kitchen at the same time, some people trace the origin, began to concern the safety of food packaging. I think that food is safe or not, in addition to the food production process is strictly in check, the safety of food packaging should arouse our attention, bamboo flooring because the food factory, the longest contact time with food is that food packaging "endometrium."
The survey found that more than 90% of our country can not avoid food packaging to contain benzene. This toxic element diluent and binder in the ink appears, if manufacturers do not allow sufficient time for the production of benzene in the packaging process to evaporate, the benzene residue in the finished product to continue. In recent years, spot checks of bags around the inspection rate was generally low, has been hovering between 50% -60%. Benzene is apt to cause excessive blood system diseases, such as hemolytic anemia, aplastic anemia and leukemia.
In recent years, caused by food additives, food safety incidents can be quite, that people talk about "agents" pale. Can someone say, food packaging and even toxic food additives, food packaging as a direct transfer of harmful substances to food, and will directly lead to food insecurity. Get to the bottom, those unsafe food packaging material, who should pay for it?
First, the relevant departments should be accountable. Because the relevant departments of the safety of food packaging is still relatively loose regulation. Countries require all food producers, must obtain production licenses, and food packaging, plastic packaging enterprises only the market access system. And ceramics, glass, metal, rubber, bamboo products, paper and other wide variety of food packaging materials, most have not implemented or enforced market access system. Even more worrying is that for the market access system has been incorporated into the food containers, packaging products, there is no good to "license" the follow-up supervision. Although the AQSIQ issued a "food paper packaging, containers and other products, market access, the notice", but because of the lack of mandatory enforcement, resulting in the production of the licensee company, under the signboard of the license, do not produce more shoddy products meet standard requirements for food packaging. System flaw, harm Shen Yi.
Second, other relevant departments to be accountable. Because laws and regulations, lack of standards, is safe for food packaging, another environmental factors. In fact, China's "Food Safety Law" has long been the production of food and related products, a separate market access into the system. The production of food packaging containers, are included in the context of food safety, this is a big improvement, but still see the neglect of food packaging. In this regard, the expert says, "I feel packaging or accessories, involving fewer terms, provisions are not clear enough." In Europe, America, Japan and other countries, food packaging is equivalent to food production, environmental requirements and penalties consistent basis, which in China's food safety laws were not reflected. In this regard, I ask: food packaging safety, what can be the same as when food safety?
"Your Food Safe? Package is qualified to look at it!" This is often Canada Food Inspection Agency warned consumers of the word. Indeed, food safety, food packaging unsafe unspeakable. Perhaps because of too much food to their problems, the authorities also difficult to take into account the food packaging, containers and other quality and safety issues, but as the food, we must be wary in advance! Master certain skills and methods to see through that black heart of the "sugar-coated bullets!"
Inappropriate food packaging in the end, what poison?
1, PVC products such as solvents ethyl ether and ethanol exposure, it will lead salt precipitation, alcohol can not be used in PVC food store.
2, PVC oil-food case, one of the lead will be integrated into the food, so do not use plastic containers, Sheng oily food. Into the hot oil!
3, PVC temperature higher than 50 ℃, it will slowly release HCI gas that its harmful to human health, therefore, do not use plastic containers used for microwave heating.
4, shopping, a colored plastic packaging bags (mostly dark or black market, such as color) can not be used in food packaging. Because of these plastic bags are often made with recycled plastics.
5, try not to use additional coating, coating materials, packaged food. Although this type of packaging more attractive, corrosion resistance, but most of the paint itself is toxic. In the coating, plating process, such as paint solvents volatile toxic gases generated when the chromium plating and other heavy metals in the waste, waste pollution, but also high levels of pollution to the environment, not conducive to resource recycling.
Most importantly, consumers are shopping, be sure to pay attention to the appearance of the Chinese food labeling, use those same smell, no odor, and marked "for food" words packaged food, the best is the original paper packaging .
Among them, the selection and purchase of canned food, plastic bottles at the bottom of the triangle in the digital identity is particularly important. Because each number represents a plastic material, different materials, different performance, security, conditions of use are different. According to national standards, "1" PET (polyethylene terephthalate), normally used for mineral water bottles, soda bottles. Heat 70 ℃, only suitable for the drinks or cold drinks at room temperature, put hot liquids deformation, re-use may be prolonged release of harmful gases; "3" PVC (polyvinyl chloride), can not be used in food packaging; " 4 "on behalf of LDPE (low density polyethylene), used for plastic wrap, plastic film, there will be encountered when the melt 110 ℃ phenomenon, we use the microwave before, we must first remove the food wrap;" 5 "stands for PP (polypropylene), a microwave meal, can be heated; "6" on behalf of PS (polystyrene), used to bowl instant noodles, boxes, fast food box production, but not into the microwave oven to heat, but can not used to load the strong acid, strong alkaline substances.