First, the higher the price of solid wood flooring
Solid wood floors can be divided into hardwood flooring and cork flooring. One of the hardwood floors have hard texture, delicate texture, good wear resistance, elasticity,bamboo furniture dry, clean, beautiful, etc., the use of wood are ash, birch, walnut, locust trees, crabapple trees, and beech, etc., high-grade Some of the wooden floor with a cherry wood, longan trees, camphor,bamboo flooring etc.; and cork flooring is mainly pine, fir? points Keteleeria, hemlock, etc.? snow, made of cedar, warm and elastic. However, poor wear resistance, if the drying is not enough, more easily deformed, cracked.
Overall, though solid wood flooring has a foot feeling good, texture, natural color, good insulation, etc., but the hardness somewhat less.
Second, the large spread of solid wood flooring
Parquet under the following three: three solid wood flooring, using three different bonding made of wood, the surface using beech, birch, oak, cherry, ash and other hard wood,bamboo kitchen using the middle layer and bottom soft wood, such as the use of pine for the middle of the plank, solid wood flooring flexibility, and relatively lower cost.
Parquet, multi-layer plywood for the base material, mosaic hardwood sheet surface by urea-formaldehyde resin laminated.
New wood flooring, hard wood surface using basically the same with the first, middle and bottom layers using medium density fiberboard or high density fiberboard, the effect and durability of solid wood flooring with the almost three.
This degree of wear-resistant flooring laminate flooring and solid wood flooring range, between the hardness is lower than laminate flooring and solid wood flooring.
Third, the most affordable flooring
Laminate flooring materials composed of three layers, the middle layer density fiberboard, strong impact, not easily deformed; bottom of balance layer, from the moisture effect; surface is covered with printed decorative layer of melamine wear layer, abrasion resistance far than wood, good flame resistance, and corrosion, moisture, decay.
Compared with the above two types of flooring, laminate flooring surface can be printed all kinds of wood, beautiful. Pavement convenient, save timber. However, poor flexibility than solid wood flooring, its biggest advantage is the cheapest price.
Fourth, the high cost of bamboo flooring
Bamboo flooring is made of treated bamboo flooring, both rich in natural beauty of natural materials, there are the advantages of wear-resistant, and can decay, earthquake. Bamboo flooring cool, moisture resistant, easy to use, especially to reduce the use of wood, protect the environment.
Fifth, the use of more reasonable worry pavement
Innovation in the current bottlenecks and flooring products growing homogenization of today, consumers should focus more on the stage floor of the pavement.
Flooring industry has been kind of saying, wood flooring is the "third floor seven loaded", that is good or bad decision to install the floor for 70 mass%. Floor with the not ideal, but largely not in place by the raised floor coverings, floor coverings issues, has restricted the maximum floor ills.
To avoid unpleasant floor maintenance, more importantly, do the sales work. First net decoration to remind them before installation, the staff must be prepared to measure four different aspects of the work, this benefit is for the latter part of the construction process can be greatly enhanced accuracy and precision, and can effectively detect the ground, "Sand , tidal, concave, convex, crack "and the five specific questions degree.
In addition, the staff but also especially for surface roughness, surface firmness, wet ground is not carefully monitored these three aspects.
Consumer Tip: select floor master the seven principles
Since wear is not the most important indicator to buy the floor, then how should consumers choose wood flooring it? Decoration first net editor summed up the seven floors of the proposed selection:
1 laminate flooring to buy a certain well-known enterprise. Products have both the national authorities test reports, product packaging must have a complete identity.
(2) to see wear rotation. Household number of wear-resistant flooring is usually more than enough choice of 4000, commonly used in public places more than 9000 rpm. Decorative layer to be resistant to light.
3 Charles formaldehyde emission limits. Laminate flooring in the formaldehyde emission 1.5mg / L can be.
4 see the substrate density. Density of the substrate of laminate flooring should be 0.84-0.9/cm3? Smoke density is too low or too high are not suitable.
5 see the water resistance. The index value is high, water resistance backward, in a wet environment lead to changes in the size, thickness swelling should be 2.5%.
6 see the processing density. Observe whether the product is smooth, tongue and groove bite is appropriate, not too loose, nor too tight.
7 Sales + pavement + warranty. "Buy" and "shop", regardless of family, to pavement acceptance criteria, and a complete after-sales service guarantee.